Arrow Plant has recently become a distributor for Morris Lubricants.

A bit of background to Morris:

Morris Lubricants is a British independent family owned company that has been manufacturing lubricants in Shrewsbury, Shropshire, since 1869. One hundred and forty years of development has seen the company grow to one of Europe's leading oil blenders and marketers, with a solid reputation for quality and service.
Morris Lubricants offers an extensive range of performance lubricants covering a wide variety of application areas. This is backed by the highest level of quality control and technical support together with an experienced customer service team and its own dedicated delivery fleet.

Morris Lubricants carries BS ISO 9001 and 14001 accreditations and embraces a policy of continual development and re-investment to reinforce our commitment to long term stability, outstanding products and second to none customer service. Morris Lubricants not only provides a service to the UK, but has an international customer base in over sixty five countries worldwide.

With such an extensive range of oils, Arrow cannot stock each and every product available from Morris Lubricants. Shown below are the products that we are currently using as standard stock.

If you cannot see the lubricant that you require below please take a look at the Morris website at www.morrislubricants.co.uk and once you have found your choice of lubricant give your nearest depot a ring and we will happily place your order with Morris.

Universal Antifreeze

Universal Anti-freeze will protect all engines from frost damage right down to –34ºC and ice damage down to –50ºC (at 50% of total coolant volume). It also provides outstanding protection against rust and corrosion for all parts of the cooling system and is therefore recommended for all year round use. This Ethylene Glycol based antifreeze, which meets the technical requirements of BS6580:1992 is designed to meet the demands of modern engines and their cooling systems.
 

Servol Part Synthetic 10W/40

Servol 10W/40 is manufactured from high quality base fluids and a carefully balanced additive system. This grade is suitable for use in petrol and diesel engines fitted to passenger cars and light commercial vehicles. Servol 10W/40 provides a high level of engine cleanliness and controls high temperature deposits, especially in turbocharged units. This grade will protect critical components, such as camshafts, valve gear and bearings from wear and ensures overall protection from rust and corrosion. Provides excellent cold starting characteristics and increased engine efficiency.

Applications
Servol 10W/40 is suitable for use in passenger cars, light commercial vehicles, horticultural equipment, etc., where a grade of this type and performance level is required.

Servol 10W/30

Servol Fuel Efficient 10W/30 is manufactured from high quality mineral oils and a carefully balanced additive system. This grade is suitable for use in petrol and diesel engines and their turbocharged versions fitted to a variety of vehicles. Servol Fuel Efficient 10W/30 provides a high level of engine cleanliness and controls high temperature deposits, especially in turbocharged units. This grade will protect critical components, such as camshafts, valve gear and bearings from wear and ensures overall protection from rust and corrosion. This multigrade provides excellent cold starting characteristics, increased engine efficiency and fuel economy.

Applications
Servol Fuel Efficient 10W/30 is recommended for use in passenger cars and light commercial vehicles, including models manufactured by Chrysler, Daewoo, Ford, Isuzu, Kia, Lexus, Mazda, MG Rover, Mitsubishi, Morgan, Nissan, Saab, Suzuki, Toyota, Vauxhall, Volvo, etc. Servol Fuel Efficient 10W/30 can also be used in agricultural, horticultrural and off-highway equipment where a grade of this performance level and viscosity grade is specified.

Multivis 10W/40 Semi-Synthetic

Multivis 10W/40 is a semi-synthetic engine oil manufactured from advanced synthetic base fluids, high quality mineral oils and the latest additive technology. This grade is designed for use in the latest petrol and diesel engines fitted to passenger cars and light commercial vehicles. Multivis 10W/40 will protect camshafts, critical valve gear and bearings from wear, even under severe cold start conditions, as well as controlling rust and corrosion. Multivis 10W/40 has extremely good high temperature performance and will control deposits and keep components clean, helping to maintain operating integrity.

Applications
Multivis 10W/40 is recommended for use in 4-stroke petrol and diesel engines, including turbocharged and supercharged units, fitted in passenger cars and light commercial vehicles, where an oil of this type and specification is required.
Multivis 10W/40 can also be used in ATVs (with dry clutches), horticultural equipment and generator sets.

EP80W/90 API GL5

EP Gear Oils are mineral oil based lubricants formulated for use in a wide range of automotive, plant, agricultural and industrial transmission systems. These grades have a high level of extreme pressure (EP) additive that provides effective gear protection over a range of temperatures and shock load conditions. EP Gear oils also protect components from rust and corrosion.EP Gear Oils are mineral oil based lubricants formulated for use in a wide range of automotive, plant, agricultural and industrial transmission systems. These grades have a high level of extreme pressure (EP) additive that provides effective gear protection over a range of temperatures and shock load conditions. EP Gear oils also protect components from rust and corrosion.
Application
EP Gear Oils are designed for use in a wide variety of applications, including: manual gearboxes, transaxles, transfer boxes, PTO boxes, reduction hubs/gear, differentials (including hypoid designs), axles, planetary and epicyclic drives, shaft drives, sprocket drives, track drives, track rollers, track idlers, hoist/winch gearboxes, steering boxes, oil lubricated bearings, swivel housings, swing gearboxes, slewing rings/gears, etc. Additionally, EP75W/80 has been specifically formulated for use in Peugeot/Citroen gearboxes requiring an oil of this viscosity classification and performance level.